Highly precise I-MARK sensing and servo drive leads precise packing as well as less noise.
The film board can be adjusted from left to right, the photocell can be calibrated.
3.Alarm of Replace Film
Alarm gives notice 2 minutes prior to the film is finished When the film is completely consumed, the machine will stop at its Designated position.
This machine seals products twice consecutively for perfect sealing. The product cutting is being done at the same time the machine does the secondary sealing. Reduce the rate of nonconforming products and improve production efficiency.
A variety of safety devices installed in a machine and alert when any doors opened or hot-wire snapped via buzzer sounds.
Adjusting handles are located in front of the machine for easy operating. The front end of the whole machine is embedded mechanism with independent module, optional inkjet code and spacious laser equipment space. It is convenient for operators to operate and maintain.
7.Comply with GMP standard
According to GMP standards, AISI 316L stainless steel is used in the contact part with pharmaceuticals, and AISI 304 stainless steel is used in the machine cover which meets the standards.
8.Slot Type Transition Conveyor
Transfer the transferred 10 bags to 10 slot type transition conveyor belt, and ensure that each interval on the transition conveyor belt has another bag product. Meanwhile, transfer the transferred bags to the secondary counting mechanism of the station.
After each bag goes through the round-cutting mechanism, copper tube type cooling finalize the shape, and the bag is more artistic.
Double-tearing mechanism realize cutting a small opening at the longitudinal sealing edge of the bag, so that it is easier to open the packaging bag.
11.Waste Edge Winding Function
The excess edge material on both sides is cut out by the cutting knife splitting mechanism and pulled to the waste edge winding mechanism through the guide pipe. When the tension roller reaches the lower limit, the feedback signal of the sensor is sent to the winding motor, which is repeated to realize the wrapping film waste side winding function.
12.Human Machine Interface
Menu type operation interface in both Chinese and English, easy to learn and operate, and parameter storage function. It can store up to 50 sets of parameter information, convenient to use. Multi-variety production can effectively reduce the adjustment time of changing varieties.
Fault display function to help operators quickly troubleshooting.
Fill the blanking through screw rotation, and after packed by multi-stick automatic packing machine, the slip-out bags slide to 10 stations on the conveyor belt through 10 chutes linked on the machine. Transfer bags on the lifting groove by using lifting mechanism, and then 10 bags are transferred to the conveyor belt by intermittent movement. Meanwhile, the use of servo drive control system makes equipment more accurate position control, more stable and more reliable.